Microbit RRC-1258 MkII(s) Uživatelský manuál stáhnout pdf (Strana 212)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

212 of 236

Radio settings (example)

Parameter

Control

Radio

Program mode

4 – Yaesu, Kenwood, Elecraft

SIP password

hello

SIP contact

192.168.0.228

Auto connect

Audio quality

2 – Linear 16 bits 8 kHz

Audio Dual-RX

Yes/No

Codec out gain

255

Codec inp gain

Codec inp preamp

Yes

Codec inp HPF Hz

163

COM0 baudrate

9600

COM0 data bits

COM0 stop bits

COM0 parity

0 - Off

(*) Available only in RRC-1258MkIIs, remember that the bandwidth demand is doubled.

Connections

Control-RRC:

 Connect a standard RS-232 cable between the PC and the RRC COM2.

 The microphone can be connected direct to the RRC AUX/MIC connector if you have a

microphone with RJ-45 connector. If you have a microphone with a circular connector you

can use the Remoterig K14a cable, use the MJ-88, from Kenwood or make one by yourself

(drawings are provided).

 The speaker is connected direct to the RRC SP-jack with a 3.5 mm stereo plug.

Radio-RRC:

 From the RRC COM2 connector to the radios KIO3 module connector (D-sub RS-232) you

use a standard RS-232 cable.

 Between the RRC AUX/MIC connector and the radios circular microphone jack you can use

the Remoterig K15a cable or make an adapter cable by yourself (drawings are provided).

Make the cable as short as possible to prevent it from picking up HF.

 The speaker signal from the radios external speaker jack to the RRC SP jack is connected

via a standard "off- the-shelf” cable with 3.5 mm stereo plugs in both ends.

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 235 236

Komentáře k této Příručce

Žádné komentáře

Microbit RRC-1258 MkII(s) Uživatelský manuál Strana 212

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání Microbit RRC-1258 MkII(s)