Microbit RRC-1258 MkII(s) Uživatelský manuál stáhnout pdf (Strana 132)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

132 of 236

The small pcbs are mounted in the strapping sockets which means that no red straps are

needed. The pcb with the yellow cable are mounted in the Control-RRC and the pcb with the

blue cable are mounted in the Radio-RRC. The yellow and blue cables need to be solder to one

point on the RRC pcb. See pictures below. Be sure to remove power when solder. There is no

settings that need to be changed after mounting the pcbs.

There is one solder pad which is significantly

bigger than the other via holes to the right of

the CPU over the Crystal. That’s the one

which the cables should be soldered to.

Control-RRC

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 235 236

Žádné komentáře

Microbit RRC-1258 MkII(s) Uživatelský manuál Strana 132